Skip to the main content

Webal Facebook

Your Facebook Page’s latest posts on your site, loaded only when a visitor says yes.

Webal Facebook shows the posts of a Facebook Page in a box on your page, but only after the visitor agrees. Until they press Load, nothing at all is requested from Facebook or Meta: the box shows a plain explanation, the Load button and a link to the Page. These demos use Facebook’s own public Page and stop at that first step, so no visitor’s data goes to Facebook from this page. Below, the same module in four settings, each with the steps to set it up.

These four settings are only a sample. Every option of Webal Facebook can be combined with the others, so it can look many more ways than shown here: each option is explained in the options of the Webal Facebook manual.

On this page

  1. The Page feed, before it is loaded
  2. With a preview picture, wider, in the middle
  3. Timeline and Events tabs, a small header
  4. Messages tab, at the end, dark colours

The Page feed, before it is loaded

The consent box a visitor sees first: what Facebook receives if the feed loads, a Load button and a plain link to the Page. Pressing Load fetches the feed from Facebook.

How to set this up

In the administrator choose Content, then Site Modules, press New and choose Webal Facebook.

  1. On the Module tab, under Facebook, paste the main address of your Page into Facebook page address, for example https://www.facebook.com/YourPageName.
  2. Type a short Name of the feed. It is the text of the Load button.
  3. On the Look tab, keep Width of the feed (pixels) at 340 and Height of the feed (pixels) at 500, and Show the Timeline tab on Yes.
  4. Choose the Position, press Save, then pick the page on the Menu Assignment tab.

With a preview picture, wider, in the middle

The same box filled with a picture of your own until the feed is loaded, 500 pixels wide, in the middle of its column.

How to set this up

Open your Webal Facebook module from Content, then Site Modules.

  1. On the Module tab, choose a Preview picture from your own site. It fills the box until the feed is loaded.
  2. On the Look tab, set Width of the feed (pixels) to 500 and Height of the feed (pixels) to 420.
  3. Set Place the feed to In the middle of the column.
  4. Press Save & Close.

Timeline and Events tabs, a small header

A taller box that will show the Timeline and Events tabs, with the small header and no large cover photo once it is loaded.

How to set this up

Open your Webal Facebook module from Content, then Site Modules.

  1. On the Look tab, set Height of the feed (pixels) to 640.
  2. Set Show the Events tab to Yes.
  3. Set Use the small header to Yes and Hide the cover photo to Yes. Both are Facebook’s own switches, so they take effect inside the feed.
  4. Press Save & Close.

Messages tab, at the end, dark colours

The consent box on a dark band, 400 pixels wide, at the end of its column, ready to show a Messages tab.

How to set this up

Open your Webal Facebook module from Content, then Site Modules.

  1. On the Look tab, set Width of the feed (pixels) to 400 and Height of the feed (pixels) to 380.
  2. Set Place the feed to At the end of the column and Show the Messages tab to Yes. Facebook asks the visitor to log in before they can send a message.
  3. On the Layout tab, under Colour scheme, choose Dark, for a module on a dark part of the page.
  4. Press Save & Close.

Every module, one licence

Webal Blocks: 39 modules for Joomla 6, with Webal Layouts and a manual for every block. From £59 a year, including VAT.